FILLSTY - Change fill-style plotting attributes

Description:

Change the PGPLOT fill-style attributes.

This is an hidden ICL procedure that makes use of the CHANGE command.

Usage:

fillsty fillsty [angle] [separation] [phase]

Parameters:

ANGLE = _REAL (Read)

The angle hatch lines make with horizontal, in degrees. Only used when FILLSTY is 3. [45.0]

FILLSTY = _INTEGER (Read)

The fill style used by PGPLOT. The fill styles are as follows:

• 1 - solid fill,

• 2 - hollow fill,

• 3 - hatched,

• 4 - cross-hatched

The must be specified on the command line.

PHASE = _REAL (Read)

The fraction of SEPARATION that hatched lines are displaced. Modifying this between regions makes their separation more obvious. This is only used when FILLSTY is 3.

SEPARATION = _REAL (Read)

The separation of hatched lines. The unit spacing is 1 percent of the smaller of the height or width of the view surface. Only used when FILLSTY is 3.